HuaboPipe Logo HuaboPipe

CHINA MANUFACTURER · SUPPLY FOR STOCKISTS & DISTRIBUTORS

Stainless Steel Butt-Weld Fittings Manufacturer in China

HuaboPipe: founded 2004; company in Wenzhou; factory in Lishui (No. 102 Longqing Road, Shuige Industrial Zone); warehouse in Longwan. HuaboPipe is a China manufacturer of cold-formed stainless steel butt-weld fittings. Standard range is DN15–DN1200; larger sizes are made to drawing, up to DN3000. Dimensions follow ASME B16.9, EN 10253, DIN, JIS or your drawing. We welcome inquiries from stockists, importers and distributors for 304/316L elbows, tees, reducers and caps to EN 10253, DIN or JIS, or to your drawing.

Send your item list for a quotation. Mixed-size trial orders can be discussed for standard items; quantities, specifications and lead time are confirmed for each order.

ASME B16.9 Size Range (Dimensions)

Fittings are manufactured to ASME B16.9, GB/T 12459, EN 10253, DIN and JIS dimensions. ASME here means the dimensional standard, not a certificate claim.

TypeNPS (approx.)DNWall (Sch)Notes
Elbows 45° / 90° / 180°1/2–48DN15–DN1200Sch10s–XXSLong radius 1.5D standard; short radius to drawing
Tees (equal / reducing)1/2–48DN15–DN1200Sch10s–XXSState header and branch for reducing tees
Reducers (concentric / eccentric)1/2–48DN15–DN1200Sch10s–XXSState both ends
Caps1/2–48DN15–DN1200Sch10s–XXS—
Stub ends1/2–48DN15–DN1200per orderFor lap-joint flanges
Larger sizes—to DN3000per drawingStandard DN15–DN1200; larger to drawing up to DN3000

Stocked grades: 304/304L, 316/316L, 310S, 321, 2205, 2507. Cold formed. Electropolishing available as a matching service.

Related pages

Fittings for Your Purchasing List

Build your list with elbows, tees, concentric and eccentric reducers, and pipe caps. For each item, specify the material grade, size, wall thickness or schedule, and quantity. Please also state whether seamless or welded construction is required.

Specify the Grade, Dimensions and Inspection Requirements

Stocked grades
304/304L, 316/316L, 310S, 321, 2205, 2507. State the exact material specification and grade required.
Dimensional standard
EN 10253, DIN, JIS or customer drawing. Include the required edition or project specification where applicable.
Sizes and wall thickness
Send your DN or NPS sizes; wall thickness per order. We confirm each item and quantity before quotation.
Other requirements
For EN 10253-4, DIN 2605, duplex grades or special dimensions, send the specification or drawing for review.

A dimensional standard covers dimensions; state the material grade and pressure rating separately. If your order requires ASTM A403, include the exact grade and construction class in your inquiry so we can confirm the requirements before accepting the order.

Mixed-Size Trial Orders

Starting with a new supplier? We can discuss small trial orders combining standard items in different sizes. Send the quantities for each line so we can review production suitability and quote the order.

Minimum quantities for special items, production availability and delivery schedules are confirmed individually. Lead time depends on the specifications, total quantities and production schedule.

How We Make the Fittings

  1. Material check: the mill certificate and heat number are checked for each material lot.
  2. Cutting: material is cut to length for each size.
  3. Cold forming: elbows, tees, reducers and caps are cold formed.
  4. Heat treatment: solution annealing after forming.
  5. Bevelling and finishing: ends are bevelled to the standard or drawing, and surfaces are ground.
  6. Surface treatment: polishing, pickling, sand blasting and sand tumbling.
  7. Inspection: each lot is inspected to the scope listed below.
  8. Marking and packing: markings are checked against the order, then the fittings are packed for shipment.

Address: No. 102 Longqing Road, Liandu District, Lishui, Zhejiang, China; warehouse in Longwan, Wenzhou. See the Wenzhou and Lishui factory page.

Inspection Available

Tell us the inspection scope your purchase specification requires and we will confirm it with the quotation.

PMI
PMI inspection available.
Dimensions and wall thickness
Size, wall thickness and elbow center-to-end dimensions are checked.
Appearance
Visual inspection; surface defects are removed by grinding within wall-thickness tolerance.
NDE and hydrostatic test
PT, UT, RT and hydrostatic testing when specified in the order or drawing.
Documents
EN 10204 3.1 material certificates are available. EN 10204 3.2 material certificates are available on request.
Third-party inspection
Third-party inspectors are welcome for in-process and final inspection at the factory.
Handheld spectrometer performing PMI alloy inspection on stainless steel butt weld elbows at the HuaboPipe factory in Lishui

Material Documentation & Batch Traceability

Material documentation with heat numbers, chemical composition and mechanical test results can be supplied, with traceability to the corresponding products or batches.

Please specify the inspection document type, marking requirements and any additional testing before ordering. We will confirm the documentation and inspection scope with your quotation.

Our published manufacturer certificates are available for review. Approval coverage depends on the product, material, manufacturing process and dimensions stated in each certificate and its annexes.

View Manufacturer Certificates

Certificates

China Special Equipment Production License (TS)
No. TS2733H03-2027
ISO 9001 quality management system
No. 054726Q00030R100
ISO 14001 environmental management system
No. 054726E00020R100
ISO 45001 occupational health and safety management system
No. 054726S00015R100
Certificate of Quality Assurance System (PED 2014/68/EU Annex I 4.3 & AD 2000-Merkblatt W 0), issued by TÜV SÜD Industrie Service GmbH
No. DGR-0036-QS-W 1127/2023/MUC-02
DNV Approval of Manufacturer
No. AMMM00003D7
BV Manufacturer Approval
No. SMS.W.II/154364/A.0

Industries We Supply

Industrial piping for oil and gas, chemical and petrochemical plants, LNG, shipbuilding and offshore, power plants and boilers, pulp and paper, and water treatment and desalination.

Send Your List for a Quote

To help us prepare a useful quotation, please include:

  • Fitting type and dimensions, including elbow angle or reducer end sizes where relevant
  • Material specification and grade
  • DN or NPS size, plus schedule or wall thickness
  • Seamless or welded construction requirements
  • Quantity for each item
  • Inspection documents, marking and testing requirements
  • Destination country and port, with your preferred trade term if known
  • Requested delivery date and drawings for non-standard items

We will review your list and confirm the specifications, pricing and lead time. A requested delivery date is subject to confirmation.

Email: lucas@hbpipe.com

Purchasing Questions

Can I combine different sizes in a trial order?

Yes, mixed-size trial orders can be discussed for standard items. Send your list and quantities so we can confirm which items can be supplied together and any minimum quantities that apply.

How do I confirm the lead time?

Send the specifications and quantity for each item. We will check the production schedule and confirm the lead time with the quotation.

Can you provide material documents and traceability?

Yes. Tell us which inspection documents and marking requirements your purchase specification calls for. The document type and inspection scope must be agreed before ordering.

What does HuaboPipe make?

Huabo Pipe Industry Co., Ltd. (HuaboPipe) makes stainless steel butt-weld fittings and forged flanges; stainless steel pipe and valves are supplied with projects. Fittings include cold formed elbows, tees, crosses, reducers, caps and stub ends.

What is the largest size you can make?

Standard sizes DN15 to DN1200 (1/2" to 48"); larger sizes are made to drawing, up to DN3000. Wall thickness per order.

Which standards do you make fittings to?

Butt-weld fittings are made to ASME B16.9 dimensions. The other dimensional standards are listed under "Specify the Grade, Dimensions and Inspection Requirements"; state the standard and edition in your inquiry.

How do I choose between 304 and 316L?

304/304L suits general corrosion service. 316L is used for mild chloride and many chemical media. For seawater and higher-chloride service, 316L has low pitting resistance (PREN about 24); duplex 2205 or super duplex 2507 is usually specified there. The final grade follows the project material specification.

Related Resources