HuaboPipe Logo HuaboPipe

Since 2004. Factory in Lishui, Zhejiang.

Forged Flange Manufacturer

We make forged stainless steel flanges to order: WN, SO, LWN, blind and lap joint, to EN 1092-1 or to drawing. Stocked grades: 304/304L, 316/316L, 310S, 321, 2205, 2507.

Stainless steel forged flange blank clamped in a lathe chuck during machining at the HuaboPipe factory in Lishui

Forged flanges we make

Slip-on, welding neck, blind, lap joint, and long welding neck flanges, plus non-standard blind flanges.

Turning the bore and face of a stainless steel forged flange ring on a lathe with coolant

Standards

EN 1092-1 or customer drawing. Class 150 to 2500. Larger slip-on flanges are made to the drawing. Send the facing, class, and material with the inquiry.

Facing a large-diameter stainless steel forged flange ring on a heavy-duty lathe at the HuaboPipe factory in Lishui

How We Make the Flanges

  1. Forged blank: forged blanks are prepared by grade and size, and heat numbers are checked against the material certificates.
  2. Heat treatment: solution annealed.
  3. Machining: faces, bores and outside diameters are turned, RF, FF or RTJ facings are machined, and bolt holes are drilled to the standard or drawing.
  4. Surface treatment: pickled and passivated.
  5. Inspection: dimensions, material and appearance are checked to the scope listed below.
  6. Marking and packing: flanges are marked and packed for shipment.

Address: No. 102 Longqing Road, Liandu District, Lishui, Zhejiang, China; warehouse in Longwan, Wenzhou. See the Wenzhou and Lishui factory page.

Inspection and Documents

PMI
PMI inspection available.
Dimensions
Outside diameter, bore, thickness, bolt holes and facing dimensions are checked.
NDE and hydrostatic test
PT, UT, RT and hydrostatic testing when specified in the order or drawing.
Documents
EN 10204 3.1 material certificates are available. EN 10204 3.2 material certificates are available on request.
Marking and traceability
Each flange is marked, and the heat number traces back to the material certificate.
Third-party inspection
Third-party inspectors are welcome for in-process and final inspection at the factory.

Certificates

China Special Equipment Production License (TS)
No. TS2733H03-2027
ISO 9001 quality management system
No. 054726Q00030R100
ISO 14001 environmental management system
No. 054726E00020R100
ISO 45001 occupational health and safety management system
No. 054726S00015R100
Certificate of Quality Assurance System (PED 2014/68/EU Annex I 4.3 & AD 2000-Merkblatt W 0), issued by TÜV SÜD Industrie Service GmbH
No. DGR-0036-QS-W 1127/2023/MUC-02
DNV Approval of Manufacturer
No. AMMM00003D7
BV Manufacturer Approval
No. SMS.W.II/154364/A.0

Approval scope, validity dates and annexes are as stated on each certificate. View the original certificates on our Certificates page.

Industries We Supply

Industrial piping for oil and gas, chemical and petrochemical plants, LNG, shipbuilding and offshore, power plants and boilers, pulp and paper, and water treatment and desalination, including pressure vessel and heat exchanger nozzles (LWN).

What to send for a quote

  • Standard: EN 1092-1 or drawing
  • Type: SO, WN, blind, lap joint, or drawing
  • Material and class
  • Size and facing
  • Quantity
  • NDE and material certificate requirements (EN 10204 3.1 or 3.2)
  • Delivery place

Email lucas@hbpipe.com.

Frequently Asked Questions

Are your flanges forged?

Yes. Our stainless steel flanges are forged: WN, SO, LWN, blind, non-standard blind and lap joint flanges.

Which standards and pressure ratings do you cover?

EN 1092-1 (PN ratings) or your drawing. Flanges are made to ASME B16.5 dimensions. The pressure rating is confirmed per order.

What is the largest flange you can make?

Standard sizes DN15 to DN1200; larger sizes are made to drawing, up to DN3000.

WN or SO: which should I choose?

For high pressure, thermal cycling, vibration, or welds that need radiography, WN is usually preferred. For lower pressure and faster installation, SO is common.

Can you make duplex 2205 and 2507 flanges?

Yes. Duplex flanges are forged in 2205 (ASTM A182 F51 / F60, EN 1.4462) and 2507 (ASTM A182 F53, EN 1.4410).

Which facings are available?

RF as standard; FF and RTJ to drawing. The facing and pressure rating should match the mating flange.

Can I order flanges together with butt-weld fittings?

Yes. Flanges and butt-weld fittings can go on one order; stainless steel pipe and valves are supplied with projects. Send the list as described under "What to send for a quote" and attach drawings for non-standard items.

Related

Butt-weld fittings and duplex 2205 / 2507. Guides: EN 1092-1 forged stainless flanges and large diameter fittings and flanges.